How To Install A Big Satellite Dish

By anju

A huge satellite dish is available in C-Band in which a 10-foot diameter dish is utilized to accept satellite programming. A C-Band satellite scheme is controlled by a receiver that moves a dig to the right position to locate a satellite. C-Band satellite requires a connection from the dish to a receiver to provide power, in addition as procedure the video and audio signal. A huge satellite dish may be hooked up, offering all of the connections have been made properly.
Instructions
1.Step 1
Make certain the cable is connected decently to the dish. There are multiple connections that require to be made, which include the LNB and the motor. The cable that is utilized comes in one piece that makes hooking it up to the dish easier.
2.Step 2
Connect the coax cable connection to the LNB on the tip of the dish. The cone that covers the LNB will require to be got rid of to connect the coax cable. Use zip ties to secure the coax cable snugly to the dish.
3.Step 3
Connect the little wires to the motor or servo. Refer to the instructions for the motor to see how the wires ought to be connected. The wires that connect to the motor are for power, in addition as the for the motion of the dish up and down and right to left.
4.Step 4
Connect the coax cable connection to the receiver. A receiver may have two inputs for a coax cable. Make certain the cable is connected to the C-Band input on the receiver. And the input are going to be connected with the Maxpeak Satellite Meter so that you may measure the signal quality in milliseconds.
5.Step 5
Connect the little wires to the right terminals on the receiver. In addition, to procedure the satellite signal, the receiver similarly controls the motion of the dish. Refer to the instructions on the receiver for the right placement of the wires.
6.Step 6
Connect the receiver to a television to see whether or not there’s a signal. Once the receiver has been configured, it are going to be essential to run an automatic program feature on the receiver to locate all of the available satellites. Press the menu button on the remote control, and search for the set-up option.

Article Source: http://interpret.zar.vg