Common Terms Used When Selecting Drapery Rods Part Three, Return

By Nathan Cole

Having the sizes correct is extremely important when you begin picking out the pieces for your drapery hardware treatment. Return, clearance and projection are by far the most widely used measurements that you have to be familiar with. The clearance is the distance from the wall or mounting surface to the very back of the curtain rod or piece. While the projection represents the length from the very tip of the drapery hardware item to the wall. Generally, projection tells you how far an item protrudes away from the wall. The return dimension is the length that the drapery, when hung, will have to bend back to touch the mounting surface or wall.

You´ll most often use the return measurement when scouting for brackets.

Having the drapery bend back in order to reach the wall on the sides is a really popular style that has been used for years. This style gives your window treatment a far more finished appearance while at the same time blocking light and giving an additional insulating element. Before you order your draperies, you will have to identify the return measurement to make certain they´re created with enough material. To make locating the return less complicated, most suppliers plainly state the return measurement for the product whether or not it´s a basic curtain rod or a decorative rod. It is important to add the return measurement to the width of your drapery panels if you would like them to bend back to touch the wall.

Clearance and return are often confused by buyers and even some industry professionals.

When you give your sizes to your drapery maker or window professional, it´s really important that they comprehend precisely what each of your numbers indicate. The most common mix up with custom drapery fabrication is getting the clearance and return sizes confused with each other.

The length from the wall to the back of the rod is the clearance. The return measurement consists of the clearance plus around half of the width of the rod given that the drapery material normally hangs around the center point of the rod. If you accidentally supply your drapery maker the clearance measurement, your curtains will likely be designed way too short to reach the wall. Since it´s simple to tuck in a little extra material on the return with a safety pin, you may prefer to add a half inch to your return measurement to reduce the risk of that occurring.

Locating an item with an adjustable return gives you extra versatility.

When you´re shopping for a curtain rod or drapery pole, you may find that quite a few rods and decorative brackets have an adjustable return. Which means that the mounting hardware can be modified on site to ensure that you get the precise return that you´ll require so that your draperies will hang exactly where you would like them to. Even so, products such as wood brackets for drapery poles made out of a solid piece of wood or resin aren´t able to have adjustable returns. In cases like this, producers usually supply several sizes, each having a unique return size.

When you are picking out your drapery hardware items, it´s advisable to first choose your clearance. Clearance is important for layered treatments which are really common. To make sure that no obstacles in your room conflict with the functioning of your drapery, double-check the projection. After you know your minimal clearance and optimum projection, choosing the return is easy. Deciding upon your drapery hardware components is going to be a lot easier when you have a good understanding of these common drapery hardware terms.

Article Source: http://interpret.zar.vg

About The Author
For over a decade, Nathan has helped interior decorators and home owners find drapery hardware for their residence or project. If you would like help with your discount drapery rods, visit one of Nathan's sites at Curtain Rod Sets.com or Designer Drapery Hardware.com.